|
Features
•
Protects copiers against the most severe spikes and surges
• Filters ground noise
to less than 0.5V
• Provides the maximum
reduction in service calls
• Protects
telephone/Modem/Network
Transformer Based Filters
(TBF™)
The patented TBF™ technology is the application of the differential transformer to power quality products. The differential transformer provides noise rejection equal to an isolation transformer with a much smaller footprint. This engineering accomplishment enabled scaling and the noise rejection desired for a wide range of amperage and voltage applications.
Voltage spikes are one of the main causes of system failures and cause thousands of service calls annually on all types of electronic systems. Service calls that are avoidable. Smart Power Systems' transformer based filters deliver unequaled performance. TBF™ technology protects against minor and severe spikes and surges that comprise over 80% of power problems. Our filters range from 7 to 20 amps and protect systems requiring 120 to 240 volts.
Benefits
Smart Power Systems' TBF™ technology eliminates power issues that
cause disruption, degradation and destruction to electronic components.
Transformer based filters eliminate numerous power problems.
Applications
Smart Power Systems' filters are deployed with POS terminals, computers, digital copiers and many other microprocessor based products.
Performance Factors
• Common Mode Noise Clamping < 0.5 Volts
• Normal Mode Noise Clamping < 10 Volts
• Faulty Wiring Detection
• Surge Protection
• Prolonged Over Voltage Protection
• Correct Harmonic Distortions (Model Dependent)
Download Datasheets
|
|
|
|
|
|
|
MODEL |
COPIER
GUARDIAN |
|
Cord |
6 Feet |
|
Color |
Black |
|
Frequency |
50/60Hz |
|
Response Time |
Instant |
|
Efficiency |
99% |
Noise Attenuation
Common Mode Noise Rejection
(Freq: 150KHz to 6MHz) |
More
than 70dB |
Normal Mode Noise Rejection
(Freq:30KHz to 6MHz) |
More
than 60dB |
EMI/EFI
(Freq: 30KHz to 30MHz) |
More
than 70dB |
Transient Let
Through Voltage
(Common Mode) (N-G) |
<0.5V |
Transient Let
Through Voltage
(Normal Mode) (L-N) |
<10V |
|
Output Crest Factor |
4 Min. |
|
Distortion |
<1% THD
Added |
|
Load Power Factor |
.3
leading to .3 lagging |
|
Overload Capacity |
1000% 1
Second |
|
Size (H x W x D) (Inches) |
6.15 x
4.5 x 1.75 |
|
Net Weight (Lbs.) |
2.05 |
|
Warranty |
Lifetime |
|
UL Listing |
cUL, UL
1449, UL 991 |
|
|
Extra Industrial
Withstand Test - The unit is tested with ANSI / IEEE C62.41
Cat.B2-6000V
/ 3000A (Impulse 8 by 20 micro second) |
|
Model
Comparison
|
|
Part
Number |
Output
Amps |
Input / Output
Voltage |
Standard
Plug |
Receptacle
Type and No. |
Tel / Network
Protection |
|
TBF15C-1120 |
15 |
120/120 |
5-15P |
5-15R
(2) |
NO |
|
TBF15C-1121TN |
15 |
120/120 |
5-15P |
5-15R
(2) |
RJ11
+ RJ45 |
|
TBF15C-1131TN |
15 |
120/120 |
5-15P |
5-15R
(3) |
RJ11
+ RJ45 |
|
TBF20C-1210 |
20 |
120/120 |
5-20P |
5-20R
(1) |
NO |
|
TBF20C-1211TN |
20 |
120/120 |
5-20P |
5-20R
(1) |
RJ11
+ RJ45 |
|
TBF15CZ-1121TN |
15 |
120/120 |
5-15P |
5-15R
(2) |
RJ11
+ RJ45 |
|
TBF20CZ-1211TN |
20 |
120/120 |
5-20P |
5-20R
(1) |
RJ11
+ RJ45 |
|
TBF15C-2111TN |
15 |
208/208 |
6-15P |
6-15R
(1) |
RJ11
+ RJ45 |
|
TBF20C-2211TN |
20 |
208/208 |
6-20P |
6-20R
(1) |
RJ11
+ RJ45 |
|
|
|
Specifications subject to change without notice |
|
© Copyright Smart Power Systems
|